In a world where more and more people are drawn to DIYs and new handmade crafts, resin is growing more popular. This is also referred to as deep pour resin.
Let’s say you’re a fan of resin videos on TikTok; you must’ve wondered what the tools in the video are used for.
What are resin molds used for?
Resin molds are used for enabling the casting of both natural and synthetic resins into any shape and form you like. Resin mold can be used to make plastic-like components for manufacturing or lightweight jewellery components.
Keep reading to learn more about resin molds, what they are used for, and how to make them.
What Is a Resin Mold?
Think of resin molds as magic things that allow you to create any shape you want with any substance, in this case; it’s resin.
Molds may be used to create almost anything. You can fill the mold with resin and then decorate it with other objects, or maybe dip things they cherish in the resin to preserve and exhibit them.
You can also create a duplicate of an object, then dye or spray paint it to create a lovely creative artwork that lives forever.
A resin mold, often made from flexible good-quality rubbers, is a versatile tool. Since it can create almost anything, it must have different types and shapes in order to achieve that.
The most obvious distinction between different molds is whether they’re pre-made or DIY. Some molds can be bought in pre-made shapes already, or you can make your own mold with your chosen design.
Flexible molds may be produced from a variety of materials, such as silicone rubber or latex rubber.
A silicone resin mold is the most adaptable since it does not require a separating solution to keep the resin from sticking.
See this example of silicon molds on a budget in Amazon.
What are Resin Molds Used for?
Molds are essential tools in resin making. When the liquid is activated and then poured into a mold, it takes on the shape of the mold.
It also retains its form after cooling. As a result, resin may be used to create different shapes of coasters, jewelry, paperweights, and basically any other items.
How to Make Resin Molds? A Step-by-Step Guide
If you want to make your own resin molds, you are in luck. You can certainly make Resin molds yourself, at home, and with relative ease.
It’s a unique way to get creative and unleash your imagination in order to create something customized. In order to do this, It is critical to use a high-quality negative mold.
In this section, we’ll teach you how to create your own creative silicone mold for resin.
Construct The Frame
- The frame in which the silicone will be cast must be tightly sealed, and the prototype’s base plate must be smooth.
- You can use any smooth material except for glass. This would not reject the silicone, making later removal without destroying the silicone almost impossible.
- Using a hot glue gun, adhere the sides to the base plate. The mold joints should be properly sealed using a modeling compound.
- Once the frame is done, insert the blank in it and attach the object to the base plate using a drop of hot glue or double-sided sticky tape. Make sure to fix the blank to prevent it from slipping when you pour the silicone.
Mix The Silicone
- After weighing the needed silicone amount, combine the two components while keeping a 1:1 ratio.
- You can use a wooden spatula and a mixing up for mixing. You can also use a measuring stick to calculate the volume needed.
- Wait a few minutes before putting the silicone into the frame as this will allow any air to escape.
- Pro Tip: Because silicone is so tough, stirring a large amount of it is nearly difficult. As a result, it is preferable to separate the silicone using many tiny cups.
Pour The Silicone
- Pouring the silicone into a smooth-surfaced container is simple. You need to pour the liquid gently from a rather high point over the blank. Then, let it dry and harden.
- The time it takes for the silicone to harden and cure completely varies depending on the volume and type of silicone. It can take from 1 hour to 24 hours.
Remove The Silicone from The Frame
- To determine if the silicone is fully cured, you can gently press your finger into the mold. If you notice that it has solidified, this means that the silicone mold can now be removed from the frame.
- To prevent any issues, it’s recommended to treat it with a mold-releasing agent or oil.
The Best Resin Mold Kits to Order Online
Thinking of taking the first step into making a unique set of resin?
Here are some of the best resin mold kits that you can order online. They’re all easy to use and will guarantee you get the best results to unleash your imagination.
7. 8PCS Resin Molds Silicone Kit
Some Related Questions
Can You Put Molds for Resin in The Oven?
You can put your molds for resin in the oven if you want it to dry faster. Set the oven to 150°F and leave it for 5 minutes. Check to make sure your mold (if it’s a plastic mold) isn’t melting, and your resin isn’t heated and burning.
Note: Do this only with an oven that will not be used for food again.
What Tools Do You Need to Make Your Own Resin Mold?
Some of the tools you need to make a resin mold include mold putty, a razor blade, casting resin, a timer, and the item you want to make a replica of.
The process is the same for most molds. However, it’s generally recommended to follow the instructions on the mold putty box to ensure you get the best results.
SEE HERE A RESIN PROJECT: